Pre-flight checks
Before every flight, perform the following checks:
1. Check that the wings are correctly installed and that they do not have any damage. If needed, fix the wings or replace them with a new set.
3. Check that the servos are correctly trimmed:
If they are not (situations indicated with red), perform the trimming procedure.
4. Check that all the actuators are working correctly:
(please turn on the close captions to see the instructions)
When flying the Flapper, or just testing the actuators, pay attention to the front/back orientation of the Flapper.
If the body shells are not installed, the “spine” (square carbon rod) is on the back side of the Flapper.
5. Next, test the auto-stabilization:
(please turn on the close captions to see the instructions)
6. You are ready for the first flight!